Tacx NEO 2T Smart Cycletrainer
The Tacx NEO 2T Smart Turbo Trainer is now quieter than ever and without question one of the most powerful, realistic and accurate bike trainers available. The direct drive unit has been redesigned to provide an improved indoor cycling experience and ride feel, especially during climbs and sprints.
The NEO 2T is not only the most powerful, realistic and precise direct drive trainer from Tacx, but also the quietest. By redesigning the internal components, it has been possible to further reduce the noise of internal air displacement as well as vibrations perceived at low cadence.
The motor has also been redesigned to deliver a better indoor cycling experience and feel with the help of significantly higher torque, especially when simulating climbs and sprints. Renowned features such as road feel, dynamic inertia and descent simulation are once again on board with the current model. Pedal stroke analysis has even been improved and can now be viewed with third-party applications, allowing power distribution and ride performance to be customized with the software of choice.
Now compatible with Zwift Cog and Click.
By using a Tacx NEO 2T or 3M paired with Zwift Cog and Click, cyclists can enjoy smooth, silent virtual shifting while training, racing or riding on Zwift. Cog and Click available separately.
Features:
- Type of trainer: Interactive Smart direct drive with motor brake
- Magnets: 32 Neodymium magnets
- Transmission: None
- Electrical requirements: 100-240 Volt , Mains power optional
- Power indicator: Multicolour LED , Spot on floor
- Connection indicator: (ANT/BT) 2 LEDs
- Firmware upgradable: Yes
- Suitable cassettes - Shimano & SRAM: 8 - 12 speed. Campagnolo, SRAM XD and XD-R body sold separately (Not suitable for Specialized SCS system )
- Suitable axles Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available.
- Supplied with Front wheel support , Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm & 148x12mm , 1 month Tacx Premium software
- Max. power: (40 km/h) 2200 Watt
- Max. incline: 25%
- Simulation of descent: Yes
- Max. torque: 85 Nm
- Max. brake force: 250 N
- Flywheel: Virtual
- Mass inertia: Variable to 125kg (275.6lbs)
- Calibration: No calibration required
- Footprint: (lxw) 575 × 750 mm (22.6 × 29.5 in)
- Height: 550 mm (21.7 in)
- Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in)
- Weight: 21.5 kg (47.3 lbs)
- Article number: T2875
- Wireless communication: ANT+ FE-C , Bluetooth Smart open
- Control by: ANT+FE-C bike computers , Connect to computer via ANT+antenna , Smartphone , Stand alone , Tablet
- Output: Cadence , Power , Speed
- Read out on: Bike computer , Computer with ANT+ antenna , Smartphone , Sports watch , Tablet
- Accuracy: <1%
Tacx Neo Motion PlatesThe Tacx NEO Motion Plates will add a new level of realism to your indoor training sessions. They have been designed to add more realistic multidirectional movement to the left-right movement of the Tacx Neo trainers.
The plates snap-on to your Neo 2T or Neo Smart Trainers and you're good to go. The plates are attached magnetically and securely to the underside of the trainer. The end result is a more realistic multidirectional movement that is more akin to an outdoor ride. The plates maintain the compact footprint and almost silent performance of the trainer.
Features:
- Dimensions: 582 mm x 122 mm x 102 mm (22.9″ x 4.8″ x 4.0″)
- Added height to the trainer: 25 mm (1″)
- Range of motion: 50 mm (2″)
- Weight: 1.55 kg (3.41 lbs)
- Compatible trainers: Neo, Neo 2, Neo 2T
- Front-wheel support tyre compatibility: Up to 28 mm
- Included: Motion Plates (left and right), Motion front wheel support, documentation
Tacx Rollable Trainer MatThe Tacx Rollable Trainer Mat protects your floor and muffles the noise of your indoor training sessions.
Features:
- High Quality Foam: Made from water-repellant foam which is 6mm thick
- Extra large: 180 cm x 90 cm
- Rollable and easy to store