With the Zwift Cog pre-installed and Zwift Click included, the NEO 2T is ready to take advantage of virtual shifting. The Cog replaces a conventional cassette and provides compatibility with almost any 8–13-speed drivetrain when used with Zwift and ROUVY, helping make it easier to use different compatible bikes on the same trainer.
Zwift Click attaches to the handlebars and provides intuitive control of virtual gears. When riding in Zwift, it also puts controls for steering, menu navigation and Ride Ons within easy reach. Virtual shifting provides 24 silent, instant gears without the lateral chain movement of conventional mechanical shifting.
Beyond the Zwift Ready setup, the NEO 2T delivers the high-end indoor riding experience for which Tacx is known. Redesigned internal components reduce noise from air displacement and vibrations at low cadence, while the powerful motor delivers high torque for a more realistic feel during simulated climbs and hard sprints.
Dynamic inertia adjusts the trainer's response to recreate the sensation of outdoor riding, while descent simulation can continue to simulate downhill riding. Tacx Road Feel adds another layer of immersion by reproducing the sensation of surfaces such as cobblestones and gravel.
The NEO 2T can simulate gradients up to 25% and generate up to 2200 watts of resistance at 40km/h, with power measurement accuracy of less than 1%. No calibration is required, helping make it a convenient choice for structured training, racing and immersive indoor riding.
Features:
- Zwift Ready: Supplied with Zwift Cog pre-installed and Zwift Click for a streamlined virtual shifting setup.
- Virtual Shifting: Enjoy 24 silent and instant virtual gears without lateral chain movement.
- Broad Bike Compatibility: Zwift Cog makes the trainer compatible with almost any 8–13-speed drivetrain when used with supported virtual shifting platforms.
- Handlebar Control: Zwift Click provides convenient virtual shifting and, in Zwift, control of steering, menu navigation and Ride Ons.
- Powerful Resistance: Generates up to 2200 watts of resistance at 40km/h.
- Realistic Climbing: Simulates gradients of up to 25% with a maximum torque of 85Nm.
- High Accuracy: Measures power with less than 1% accuracy.
- No Calibration Required: Designed to provide accurate training data without routine calibration.
- Quiet Operation: Redesigned internals reduce air displacement noise and low-cadence vibration.
- Dynamic Inertia: Adjusts the trainer's response according to factors including rider weight, speed and gradient.
- Descent Simulation: Recreates the sensation of riding downhill.
- Road Feel: Simulates different road surfaces for a more immersive indoor riding experience.
- Smart Connectivity: Supports ANT+ FE-C and Bluetooth Smart connectivity for compatible training devices and applications.
- Training Data: Measures cadence, power and speed.
Specification:
- Trainer Type: Interactive Smart direct drive with motor brake
- Virtual Shifting: Zwift Cog and Click
- Zwift Cog: Pre-installed
- Zwift Click: Included
- Virtual Gears: 24
- Drivetrain Compatibility with Zwift Cog: Almost any 8–13-speed drivetrain
- Magnets: 32 neodymium magnets
- Electrical Requirements: 100–240V; mains power optional
- Power Indicator: Multicolour LED with floor spotlight
- Connection Indicator: 2 LEDs for ANT+/Bluetooth
- Firmware Upgradable: Yes
- Rear Axle Compatibility: 130mm road, 135mm MTB, 142mm and 148mm
- Maximum Power: 2200W at 40km/h
- Maximum Incline: 25%
- Descent Simulation: Yes
- Maximum Torque: 85Nm
- Maximum Brake Force: 250N
- Flywheel: Virtual
- Mass Inertia: Variable up to 125kg
- Calibration: No calibration required
- Footprint: 575 x 750mm
- Height: 550mm
- Folded Dimensions: 620 x 260 x 440mm
- Weight: 21.5kg
- Wireless Communication: ANT+ FE-C and Bluetooth Smart
- Control: ANT+ FE-C bike computer, computer via ANT+ antenna, smartphone, tablet or standalone
- Output: Cadence, power and speed
- Accuracy: <1%